Connecting to Wi-Fi

Connect with USB

1. Connect your clock to this device with a good quality USB cable

2. Click the Connect button below and select your clock in the popup

   USB JTAG/serial debug unit (DeviceID)

3. Select your Wi-Fi network SSID and enter your Wi-Fi Password

4. Click Connect and wait for Wi-Fi to be provisioned

   Once Wi-Fi is connected, your clock will automatically detect your time zone and synchronise the time. You can access the clock via its IP address or you can connect it to Home Assistant.

Connect

Connect with Bluetooth

1. Power on your clock and have it within a few meters of this device

2. Click the Connect button below and select your clock in the popup

   al60-UniqueID

3. Select your Wi-Fi network SSID and enter your Wi-Fi Password

4. Click Connect and wait for Wi-Fi to be provisioned

   Once Wi-Fi is connected, your clock will automatically detect your time zone and synchronise the time. You can access the clock via its IP address or you can connect it to Home Assistant.

Connect

Note

To change Wi-Fi details after first setup use the Update tool

Connect using Access Point

1. Power on your clock and have it within a few meters of this device

2. Connect your device’s Wi-Fi directly to the clock’s access point

   Wi-Fi

   SSID: al60
   Password: 12345678

3. Select your Wi-Fi network SSID and enter your Wi-Fi Password

4. Click Connect and wait for Wi-Fi to be provisioned

   Once Wi-Fi is connected, your clock will automatically detect your time zone and synchronise the time. You can access the clock via its IP address or you can connect it to Home Assistant.

5. Re-connect your device to your Wi-Fi network if it does not automatically do so.

Note

To change Wi-Fi details after first setup use the Update tool